OP 0309
PNEUMATIC FLOOR JACK 2T-3 STAGES
USE
MAINTENANCE
The jack requires no particular maintenance.
However, do control the condition of the balloon diaphragm
periodically, making sure there are no cracks or cuts.
If cracks or cuts are found replace the balloon, contacting an authorised assistance centre.
Expressly observe the safety rules already described in this manual.
1) Position the jack under the supports as described in the manual of the vehicle.
the manufacturing company is not responsible for any break or damage to the lifted vehicle or to
persons or property due to an incorrect use of the jack.
2. Press the right key on the distributor box for lifting. DWG.
8
3. Press the left key on the distributor box for lowering. -
After lifting the load, it is absolutely essential
to rest it on the support stands before doing any work
under it.
REMEMBER THAT THE JACK IS A LIFTING DEVICE AND
NOT A SUPPORTING DEVICE!!
- The operator’s employer will have to provide the necessary training and furnish the necessary
information about the pumping and shifting forces.
IMPROPER USE
The air-hydraulic jack has been designed and made to lift transport vehicles. Any other use of the
jack, such as for instance lifting and/or moving persons, is considered to be defi nitely improper.
Any use of the jack not in conformity with the safety rules listed in this manual is considered to
be improper use.
UP
8.
DOWN
