CLAS OM 8096, Manual, Page: 5 / 12

OM 8096
FRONT END EXERCISE LEVER
MAINTENANCE
DISPOSAL
• For proper tool maintenance and operation, we recommend that you clean threads and surfaces using
a soft cloth on a regular basis.
• Use a pneumatic screwdriver to put the levers in
traction, paying attention to place the rubber supports
underneath the frame’s point of force. (fig. 5).
• Use a hammer to hit the conical centering of the
oscillating arm to detach it (fig. 6).
• Use the pneumatic screwdriver to fully detach the
oscillating arm (fig. 7).
IMPORTANT: RESPECT THE TORQUE: 50Nm MAX
TENSION AND SERVICE BELTS
STAINLESS STEEL COMPNENTS
5
6
7