OM 8096
FRONT END EXERCISE LEVER
INTRODUCTION
NECESSARY EQUIPMENT
PROCEDURE
• Only one operator required to carry out the entire
assembly:
CASE 1: Removal of oscillating arms (fig. 1).
CASE 2: Removal of shock absorber (fig. 2).
• Ultra-fast operation thanks to pneumatic impact gun.
• Detached by means of a belt that guarantees utmost
safety and does not damage the oscillating arms in
any way.
• Adaptable to all cars and commercial vehicles.
THIS TOOL SHOULD ALWAYS BE USED ADHERING TO
THE INSTRUCTIONS PROVIDED IN THIS MANUAL.
ONLY EXPERT PERSONNEL ARE ALLOWED TO USE
THIS TOOL.
• After placing the car on a lift and raising it, lift the tool
and attach the first traction belt to the service belt, the
tool remains upright and firmly fixed (fig. 3).
• Attach the second traction belt, located opposite the
service belt, to the oscillating arm or the vehicle’s
frame (fig. 4).
Ipact wrench
1
2
3
4