CLAS EQ 3100, Manual

Page: 64 / 82

EQ 3100
AUTOMATIC WHEEL BALANCER 3D VIDEO LASER POINTER
64
Use of the special program types for ALS1 and ALS2 aluminum wheels
The machine has two special Program Types for aluminum wheels called ALS1 and ALS2.
These two programs are different from standard Program Type for aluminum wheels (ALU1 up to ALU5) because the
user is allowed to select the position where to apply the weights. This allows to balance the aluminum wheels having
particular shapes, difficult to perform with standard program where the weight are applied in precise positions.
The difference between ALS1 and ALS2 program is that in ALS1 Program Type the user could select freely the outer
balancing positions (inner position) instead in ALS2 Program Type the user could select freely both of balancing
positions.
The ALS1 or ALS2 program types use only the Distance/Diameter sensor to acquire the balancing planes chosen by
the user. The width sensor is not used.
The use of the ALS1 or ALS2 program types is divided into three parts:
• Acquisition of balancing planes (See paragraph 14.3.2);
• Balancing spin;
• Search of the balancing planes for weight application.