CLAS EQ 3100, Manual

Page: 48 / 82

EQ 3100
AUTOMATIC WHEEL BALANCER 3D VIDEO LASER POINTER
48
ENVIRONMENTAL INFORMATION
TECHNICAL DATA
THE DISPOSAL PROCEDURE DESCRIBED BELOW ONLY APPLIES TO MACHINES WITH THE SYMBOL OF THE
WASTE BIN WITH A BAR ACROSS IT ON THEIR DATA PLATES.
The crossed-out bin symbol, placed on the product and on this page, reminds the user that the product must
be disposed of properly at the end of its life. This product may contain substances that can be hazardous to
the environment and to human health if it is not disposed of properly. We are therefore providing you with the
information below in order to prevent these substances from being released into the environment and to improve
the use of natural resources.
Electrical and electronic equipment must never be disposed of in the usual municipal waste but must be separately
collected for their proper treatment.
Thus, the hazardous consequences that non-specific treatments of the substances contained in these products, or
improper use of parts of them, may have on the environment or on human health are prevented. Furthermore, this
helps to recover, recycle and reuse many of the materials contained in these products. Electrical and electronic
manufacturers and distributors set up proper collection and treatment systems for these products for this purpose. At
the end of the product’s working life contact your supplier for information about disposal procedures. When you
purchase this product, your supplier will also inform you that you may return another worn-out appliance to him
free of charge, provided it is of the same type and has provided the same functions as the product just purchased.
Any disposal of the product performed in a different way from that described above will be liable to the penalties
provided for by the nation regulations in force in the country where the product is disposed of.
Further measures for environmental protection are recommended: recycling of any packaging of the product and
proper disposal for used batteries (only if contained in the product).
Power supply voltage(1) 100/230V
Power consumption 90W
Balancing speed
140rpm
Maximum unbalance calculated 200g
Accuracy ± 1g
Shaft diameter 40mm
Working environment temperature 0° ÷ + 50° C
Storage temperature 0° ÷ + 50° C
Storage relative humidity
30% ÷ 80%
Machine weight (without accessories) 149kg
Noise level <65 dB(A)
(1) The voltage supply must be specify at the order. It is not possible to connect a machine with supply voltage of
230V to a mains of 110 V and vice versa.