CLAS EQ 3100, Manual

Page: 44 / 82

EQ 3100
AUTOMATIC WHEEL BALANCER 3D VIDEO LASER POINTER
44
SAFETY REGULATIONS
CARRIAGE, HOISTING, STORAGE AND TRANSPORTATION OF THE MACHINE
* Not following the information and overlooking the warning labels will cause the series injuries to the operators
and the other personnel.
* You can operate the machines after you completely read and understand the entire damages/warnings.
* The correct use of the machine needs the professional operator who must undertake the suitable training and
can understand the written descriptions of the manufacturer, familiar with the safety regulations and follow all these
descriptions and regulations. And mean while the operator should be a person without bad habit and of healthy
of mentality and physiology.
Before operating the machine, you must have the following conditions:
- Read and understand the information and the description in the manual
- Fully understand the characteristic and the features of the machine
- Keep the unauthorized personnel from the operative site
- Be sure the installation should be in accordance with the current standard and the regulation
- Be sure that the operators of the machine should enduce the proper training and operate the machine correctly
and safety.
- Before power off the machine, do not touch the cables, motors or other electrical elements.
Do not remove or wear out any label of danger, caution and warning or instruction. If the label is lost or fuzzy, you
should change it at once. If the label is missing, please contact with the nearest dealer to get it.
- See the accident precaution regulation related to the operation and maintenance of the mechanism of high
voltage and rotation
- The manufacturer will not be responsible for the damage and accident caused by the changes and modifications
not authorized by the manufacturer.
Place, transport and store the machine according to the indication on the package container. When transport and
hoist the wheel balancer, do not make the accessory hang, weight tray, balance shaft and display cover to be the
weight bearing area because this can cause the damage of the machine or the precision error and even the injury
to the operator. According to the construction of the wheel balancer, the center of gravity is on the right off-center,
therefore when lift the machine unpacked, the lift arm of the hydraulic vertical lift of the forklift should be deflect
to the right meaning not exceed 1/4 of the width of the machine. It is best to cover a layer of paper shell and
rubber to avoid the slide of the machine. When lift and slide the machine, there should be the personnel to hold
the machine and the maximum height of lifting should not exceed one meter. If exceeding one meter, you should
fix the machine properly.
If hoist the wheel balancer, you can pass the wide cloth band through the clearance under the machine. The
cloth band must be 2 pieces or more than 2pieces and the load bearing should be more than 500kg and the
length should be of same. The position of the cloth band should be in accordance with the requirement of lifting
the machine. When hoist, it is best that some personnel to hold the machine. When lift or hoist the machine, the
speed should be not more than 35mm/s for fear that the much inertia causing the slide and swing of the machine
to cause the dangerous.
Storage: The machine should not be exposed and should be covered with the plastic film. The machine should
be stored in the warehouse of ventilation, dry and waterproof. In the storage area, the temperature should be
controlled in the range of -10° - 55° and RH should be controlled in the range of 30% - 90%. It is forbidden to
store the machine together with the dangerous chemical, the inflammable and explosive materials or the objects
easy to born the dust.