EN
G
LI
SH
.
Attach top part of
yoke (part 11) to
stud located on
underside of front
axle support (part
9) by placing large
yoke washer (part
31) on stud and sliding
split pin (part 17) through
hole in stud. Note: Use a
slotted screwdriver to bend
apart legs of split pin in order
to secure it.
5. Slide spacer sleeves (part 21) onto
protruding threaded axles on front axle support
(part 9).
6. Slide wheels (part 5) onto axle.
7. Secure wheels with large washer (part 23), spring washer (part
30) and lastly with cap nut (part 22). Tighten cap nut until wheel is
firmly in place.
Assembly of deck
The following parts are required:
No. 1
Deck
No. 24
Bolts M8 x 20 for support bars
No. 20
Lock nuts
No. 19
Washers
No. 13
Connector
No. 14
Pulling handle
No. 15
Pull rod
No. 25
Bolt M8 x 80 for pull rod
No. 32
Pulling bolt
No. 33
Small cotter pin