EN
G
LIS
H
Front wheel-axle assembly
The following parts are required:
No. 5
Wheel
No. 9
Front axel support
No. 10
Centre bracket for front axel
No. 11
Yoke
No. 12
Bracket
No. 17
Split pin
No. 21
Spacer sleeves for wheels
No. 22
Cap nuts
No. 23
Large washers
No. 26
Bolts M8 x 15 for steering mechanism
No. 27
Bolt M8 x 17 for steering mechanism
No. 28
Small washers
No. 29
Small lock nuts
No. 30
Spring washers for wheels
1.
Attach bracket (part 12) to front axle support
(part 9) by putting two M8 x 15 bolts (part 26)
through top of bracket as well as axel support.
Secure bolts from below with small washer
(part 28) and small lock nut (part 29). Tighten
nut clockwise until parts are firmly in place.
2.
Attach yoke (part 11) and centre bracket for
front axel (part 10) to front axle support (part
9) by putting an M8 x 17 bolt (part 27) through
hole in centre bracket (part 10), then through
second hole in yoke and finally through lower
hole in front axle support. Slide small washer
(part 28) onto bolt from below and secure
it with small lock nut (part 29). Tighten nut
clockwise until parts are firmly in place.
3.
Attach yoke (part 11) to bracket (part
12) by putting an M8 x 15 bolt (part 26)
through first hole in yoke and then through
bracket. Secure bolt with small washer
(part 28) and lock nut (part 29). Tighten nut
clockwise until parts are firmly in place.