Clas Ohlson SM-8366UBR, Instruction Manual

Page: 10 / 44

10
E
n
g
li
s
h
Radio
• Press [ CLEAR/BAND ] (5) to switch between [FM1], [FM2], [FM3] and [MW](AM).
• To switch to manual search, depress and hold I
◄◄
or
►►
I . You have a 3 second
window to set desired frequency using I
◄◄
or
►►
I .
• To scan automatically press I
◄◄
or
►►
I to scan to the next station.
• Press [ M1 ] to [ M6 ] (14) in order to select a preset station from memory.
• To save a current radio station, depress one of the preset station buttons [ M1 ] to
[ M6 ] (14) for 3 seconds.
• AUTOMATICALLY STORE/PRESET SCAN (AS/PS).
AS (auto save): Automatically selects 6 strongly transmitted stations. Depress ID3/AS/PS
(3) for 3 seconds. A-STORE will begin flashing on the display. Saved stations will flash on
the display during scanning. The old stations will now be replaced with the newly scanned
stations.
PS (preset scan): Depress ID3/AS/PS (3) for less than 3 seconds. The radio will pause for
10 seconds at each stored station. Current stations will flash on the display during scan-
ning. Press again to listen to the chosen station. When the stereo has gone through the
preset stations 1-6 the scanning will automatically stop.
STEREO
The stereo automatically receives stereo signals. The ST icon will show in the display. In those
cases where only a mono-signal can be received the ST icon will disappear from the display.
RDS FUNCTIONS
This car stereo is equipped with the following RDS functions.
1. AF Alternative frequency – Automatically switches to the same station sending on
an alternative frequency. Provides uninterrupted listening.
2. CT
Automatic time setting.
3. EON Allows the stereo to temporarily jump to stations carrying vital
traffic information.
4. PI
Unique code used to identify the station’s country of origin, etc.
5. PS Displays the radio station’s name.
6. PTY Programme type.
7. REG Regional broadcasts/programme.
8. TA Traffic announcements.
9. TP Traffic programme.
• AF function
Press [ AF ] (12) for less than 3 seconds to activate the AF function. When this function
is activated the AF icon will appear on the display. If the signal is weak the stereo will
automatically switch to another station with a stronger signal on the same network.
The stereo is preset with AF activated.