E
N
G
LI
S
H
½” Air Impact Wrench
Article number: 30-9885 • Model: QS-604C
Please read the entire instruction manual before using and save it for future use.
We apologise for any text or photo errors and any changes of technical data.
If you have any questions concerning technical problems please contact our Customer
Service Department (see address on reverse.)
Important information:
Read the instruction manual carefully and make sure that you
understand everything before you use the product, save it for future use.
Safety
Product safety symbols and their meaning: Failure to respond to the safety warnings could
result in injury or damage the tool.
Warning!
Use safety glasses or a visor.
Warning!
Wear ear defenders when using this tool.
Safety instructions:
•
Always wear a visor or safety glasses.
•
Always wear ear defenders when working with air-tools, otherwise you will risk
permanent hearing impairment.
•
Never use damaged or worn sockets.
Compressed Air Supply
Warning!
Only use compressed air as the propellant for pneumatically operated tools. Do
not use oxygen or flammable gases as the propellant, as the mixture might explode and
cause injury. The air pressure must not exceed 6.2 bar.
•
The compressor must be capable of providing enough pressure and air flow for the
intended purpose. A pressure drop in the system can reduce the power of the tool.
•
Industrial pressurized air-line systems should be installed with a gradient, and
the highest point should be closest to the compressor. Easily accessible water
separators should be installed at the lowest points. The water separators should
be emptied at least once a day, more if needed. Dirt and water in the compressed
Summary of Contents for QS-604C
Page 14: ......
