-Save these instructions-
CAT5150
1
Rev. 11/20/18
Copyright © Professional Tool Products, 2018
All rights reserved
OPERATING MANUAL
•
WARNING INFORMATION
•
PARTS LIST
CAT5150
1/2" RIGHT ANGLE
GEARLESS IMPACT WRENCH
WARNING
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry
products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles.
Maximum Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 ft-lbs
Breakaway Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425 ft-lbs
Free Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9,000 RPM
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5/8"
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3/8"
Anvil Tip To Back. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1/2"
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6 lbs
Maximum Air Pressure . . . . . . . . . . . . . . . . . . . .90psig (6.2 bar)
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" NPT
Recommended Hose Size . . . . . . . . . . . . . . . . . . . . . . . . 3/8" I.D.
Average Air Consumption . . . . . . . . . . . . . . . . . . . . . . . . 3.8 CFM
SPECIFICATIONS
WARNING
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR
HEARING
PROTECTION
AVOID PROLONGED
EXPOSURE TO
VIBRATION
