Clas Ohlson NCD-7602, Manual

Page: 8 / 44

8
E
n
g
li
s
h
4. Volume control/function selector
When the stereo is first switched on, this knob works as a volume control.
a. To select other functions, press the VOL knob briefly until the desired function
is shown on the display:
•
VOL (volume)
• BASS
• TRB (treble)
•
BAL
(balance)
• FAD (fader, adjusts balance of sound between front and rear speakers).
Turning the VOL knob right or left will adjust the settings of these functions.
b. Press the VOL knob for at least 2 seconds to come to:
TA SEEK/ALARM – Turn the VOL knob to select:
• TA SEEK: The stereo searches for stations broadcasting traffic announcements.
• TA ALARM: The stereo emits a beep signal to alert the user that the current
station does not broadcast traffic announcements.
Press the VOL knob briefly to come to other functions in the following order:
PI SOUND/MUTE
– Turn the VOL knob to select:
• PI SOUND: When two stations with different programme identifications (PI) are
on the frequency which is currently playing, the stereo switches to the new
station for a few seconds before switching back again.
• PI MUTE: The radio is muted for a few seconds instead of playing the new station.
RETUNE L/S – Turn the VOL knob to select:
• RETUNE L: TA search starts after 90 seconds.
• RETUNE S: TA search starts after 30 seconds.
MASK DPI/ALL – Turn the VOL knob to select:
• MASK DPI: Searches for all AF stations (alternative frequency) but masks (skips)
those with a different PI.
• MASK ALL: Masks all AF stations with different PI and RDS (RADIO DATA
SYSTEM) stations with weak signals, and automatically switches to
the transmitter broadcasting the desired station.
EON ON/OFF – Turn the VOL knob to select:
• EON function: This provides information about other stations and alternative
frequencies (Enhanced Other Networks).
BEEP ALL/2nd/OFF – Turn the VOL knob to select:
• BEEP ALL: Button sound is on permanently.
• BEEP 2nd: Button sound is on when button held down for at least 2 seconds.
• BEEP OFF: Button sound is off.
TA VOL – Turn the VOL knob to select the desired volume for the traffic
announcements.
ADJ – Clock set, turn the VOL knob to the right to set the hours and to the left to
set the minutes.
DSP –
Turn the VOL knob to select one of the following equalizer settings: OFF,
FLAT, POP, ROCK, CLASSIC.