6
E
n
g
li
s
h
2
1
< 10°
2
182mm
53mm
3
4
TAP
1
1
2
1. Remove the front panel by first pushing the release button (7). Allow the panel
to come entirely free of the console and then push it gently to the left.
2. The panel can now be pulled out, right side first. To return the front panel, reverse
the order of removal. Insert the left side first, then the right side and then push
the front panel in carefully until it clicks into place.
3. Carefully remove the frame from
around the front panel by pressing
the upper corners upwards
and outwards.
4. Insert the two special keys to release
the catches and pull the frame off
the stereo.
5. Mount the frame into your console
and bend the metal tabs down to
lock it in place if necessary.
6. Carefully pull all the necessary cables out through the mounting opening
and connect them as instructed in the section
Connecting
.
7. Connect the cables using connecting blocks or crimped spade connectors.
Insulate all the connections using heat shrink sleeving or electrical tape.
8. Slide the stereo back into the frame until it click into place.
NB.
Be careful not to crush any of the cables or damage the connections
when sliding the stereo in.
