9
E
n
g
li
s
h
Track number
Position on the playlist
4. Control the playback and repetition of various tracks with the remote control or
the unit’s touch controls as described above.
5. You can also choose tracks by using the number keys of the remote control.
6. Example: Press [ 0 ][ 3 ], then [
►
/II ] to start playback of track 3.
Programmed playback
Up to 64 tracks can be pre-programmed to be played back in a given order.
• The tracks can only be programmed when playback is stopped.
• The same track can be programmed more than once.
1. Load the CD you want to program. Press [ FUNCTION ] repeatedly and choose
CD
.
2. Press [ MEMORY/CLOCK ].
3. Choose the track you want to program as track 1 with [
|◄◄
] or [
►►
| ]
(or use the number keys on the remote control to choose tracks).
4. Press [ MEMORY/CLOCK ] to open the next position in the playlist to program
a track.
5. Repeat steps 2 and 3 above to program more tracks.
6. Press [
►
/II ] to start the programmed playback.
-
When all the programmed tracks have been played back, playback ends.
-
The programming is stored in memory.
-
To check the order of the programmed tracks press [ MEMORY/CLOCK ]
repeatedly when playback has been stopped.
-
To play the CD in the normal way, press [ STOP ], then [
►
/II ].
-
To return to programmed playback, press [ STOP ] – [ MEMORY/CLOCK ] – [
►
/II ].
Adding a new track to the pre-programmed playlist
1. Stop the playback and press [ MEMORY/CLOCK ] repeatedly until the displayed
track number is “00”.
2. Choose a track as described above.
3. Press [ MEMORY/CLOCK ].
Changing a pre-programmed track
1. Stop the playback and press [ MEMORY/CLOCK ] repeatedly until the track
number you want to change is displayed.
2. Choose a new track as described above.
3. Press [ MEMORY/CLOCK ].
