7
E
n
g
li
s
h
IR sensor
Max distance 7 metres
Getting started
Insert the batteries (2 x AAA/LR03) into the remote control, making sure that
the polarity is correct.
Setting the clock
When the unit is plugged into a wall socket, the clock display starts to flash.
Do
not
press [ ] to start the unit. It must be off to set the clock.
Procedure:
1. Hold down [ MEMORY/CLOCK ] for two seconds. The display shows, “12 HOUR”.
The “12” is flashing. Press [
|◄◄
] or [
►►
| ] to choose 24-hour display.
2. Press [ MEMORY/CLOCK ] to confirm. The hours digits flash.
3. Press [
|◄◄
] or [
►►
| ] to set the hours.
4. Press [ MEMORY/CLOCK ] to confirm. The minutes digits flash.
5. Press [
|◄◄
] or [
►►
| ] to set the minutes.
6. Press [ MEMORY/CLOCK ]. The present time is displayed.
When an iPod or iPhone is connected
• The clock in the unit is synchronised automatically to the iPod/iPhone clock
within 60 seconds.
• The clock can be synchronised manually with an iPod/iPhone by holding
down [ MEMORY/CLOCK ].
• The clock is set for 12-hour display the first time it is synchronised.
• Set 24-hour display as explained above.
• The display only shows the clock when the unit is in standby mode.
