5
English
18
14
15
16
17
19
20
Sensor unit
14. LED indicator
15. [ RESET ]
16. Wall bracket/stand
17. Battery cover
18. Channel selector
19. Battery holder
20. Outdoor temperature sensor
Getting started
Note:
Connect the main unit to the device (step 1 below) before inserting the backup
battery (point 9). If you insert the main unit’s battery first and then connect it to
the mains, it will go into energy-saving mode and will not conduct an automatic signal
search from the outdoor aerial. In these cases press [
▲
] to conduct a manual search.
1. Plug the mains adaptor into a wall socket and then into the main unit (13).
Once the main unit has been plugged into a wall socket it will automatically begin
searching for a time signal. All buttons and controls will be inoperative whilst
the unit is busy searching for the time signal. The alarm clock will be unreceptive
to any outdoor sensor signals whilst in search mode.
2. Place the main unit and the outdoor sensor next to each other once the time signal
search has been completed.
3. Remove the wall bracket/stand
from the sensor if it is attached.
4. Open the battery cover on
the back of the outdoor sensor
by sliding it in the direction of
the arrow.
Summary of Contents for EN0062-DCF
Page 2: ...2 ...