7
E
n
g
li
s
h
Switching the alarm off
• When the alarm sounds press
SNOOZE
once to temporarily switch the alarm off.
The alarm will then start sounding again after the set snooze time.
• To deactivate the alarm, press
ALM 1
or
ALM 2
respectively. ALM 1 or ALM 2
will then stop flashing in the display.
• The alarm will sound at the same time every day.
Using the thermometer
Reading the MAX/MIN temperature
• Press the
MAX/MIN
button to display the highest measured temperature.
• Press the
MAX/MIN
button again to display the lowest measured temperature.
To reset the max temperature
Press and hold in
MAX/MIN
to delete the old max temperature.
The thermometer shows “- -” and after a few moments it returns to normal mode.
To reset the min temperature
Press and hold in
MAX/MIN
to delete the old min temperature.
The thermometer shows “- -” and after a few moments it returns to normal mode.
Changing the light intensity of the display digits
Press
SNOOZE
to change the light intensity.
Care and maintenance
Use a soft damp cloth to clean the product. Never use strong solvents or cleaning agents.
Troubleshooting
The outdoor temperature is not displayed; only two lines appear on the display.
The wireless signal transmission is not working or is disrupted. Possible solutions:
• Press
CLEAR
once and then press
RESET
on the outdoor sensor to resynchronise
the sensor and indoor unit.
• Move the outdoor sensor closer to the indoor unit or to another location.
• Check the batteries of the outdoor sensor.
Disposal
Follow local ordinances when disposing of this product. If you are unsure of how to
dispose of this product, please contact your municipality.
Summary of Contents for E0060
Page 27: ......
