Clas Ohlson E0060, Owner'S Manual

Page: 6 / 28

6
E
n
g
li
s
h
Use
Using the alarm
Setting the alarm time
The clock has two alarm times. The alarm can be chosen using the selector on
the top of the clock.
• ALM 1 – Alarm time 1
• ALM 2 – Alarm time 2
• ALM 1+ALM 2 – Alarm time 1 and 2
• OFF
– No alarm activated.
Setting alarm 1
1. Press and hold in
ALM 1
whilst simultaneously pressing repeatedly on
WAVE/HR
to set the hours.
2. Press and hold in ALM 1 whilst simultaneously pressing repeatedly on MIN
to set the minutes.
3. Release the ALM 1 button when the time is set.
Setting alarm 2
1. Press and hold in ALM 2 whilst simultaneously pressing repeatedly on WAVE/HR
to set the hours.
Press and hold in
ALM 2 whilst simultaneously pressing repeatedly on MIN to set
the minutes.
2. Release the ALM 2 button when the time is set.
Activating the alarm
Press the ALM button. The display will show one of the following depending on
which alarm is activated. Example:
• ALM 1 – ALM 1 is displayed.
• ALM 2
– ALM 2 is displayed.
• ALM 1+ALM 2 – Both ALM 1 and ALM 2 are displayed.
• OFF – No alarm activated.
Deactivating alarm 1 and/or alarm 2
To deactivate alarm 1, press ALM. ALM 1 is shown on the display.
Setting the snooze time
1. Press and hold in
SNOOZE
for 2 seconds. The display shows “05”. Keep the
SNOOZE button held in whilst simultaneously pressing the MINUTE button to
change the snooze interval time.
2. The snooze time can be set to from between 5 and 60 minutes.