Clas Ohlson D6004CK, Manual

Page: 9 / 84

9
E
n
g
li
s
h
6.3 Camera Setup
Camera settings. Activate or deactivate cameras.
• Select the desired camera with [

] - [

] - [

] -
[  ] and then press [SEL] to switch between ON
and OFF modes. N.B. If the camera channel is
set to OFF, the DVR will not record from it (See
6.4 Recording settings).
6.4 Record Setup
Recording settings.
• Select the desired camera with [

] - [

] - [

] -
[  ] and then press [SEL] to switch between ON
and OFF modes. If the camera is set to OFF in
“Camera setup mode” the DVR will not record
that channel (camera) and “NOCAM” will be
displayed on the screen.
6.5 Record Framerate
Recording frame rate per second settings.The total
number of frames per second are 50 fps (PAL) or
60 fps (NTSC). It is possible to adjust the number
of frames per second for the selected channel
(camera). If you select a value higher than 50/60
fps the setting will automatically be adjusted to the
highest possible setting.
N.B.
A higher setting will give better quality but also
take up more room on your hard disk.
• Select the desired channel (camera) with [

] - [

]
- [

] - [  ] and then press [SEL] to increase the
value or [STOP] to reduce the value.
6.6 Video Quality
Video quality settings.
There are 4 different settings:
Highest, High,
Normal
and
Low
.
N.B. A higher setting will give better quality but also
take up more room on your hard disk.
• Push [SEL] to change the setting.