Clas Ohlson Cotech VQ1220PF, Original Instructions Manual

Page: 9 / 44

9
EN
GL
IS
H
1 2 3 4
1 2 3 4
6.1 Attaching & cleaning the dust filter
Attaching the dust filter
1. Make sure that the plug is disconnected.
2. Remove the motor/top and place it upside down.
3. Slide the dust filter (I) over the filter basket being careful not to damage the filter.
Make sure that the filter covers the entire basket. (Fig. 1–2).
4. Replace the motor/top (5) onto the container (1) and fasten it with the over-centre catch (7).
Cleaning the dust filter
1. Make sure that the plug is disconnected.
2. Remove the motor/top (5) and place it upside down.
3. Carefully remove the dust filter (I) (Fig. 3).
4. Brush or shake the filter free from debris (remember to do this outdoors). Wash the filter by hand using a
mild detergent and rinse after with water. Let it air-dry for about 24 hours. Replace the filter only when it is
completely dry (Fig. 4).
6.2 Attaching & cleaning the foam filter
Attaching the foam filter
1. Make sure that the plug is disconnected.
2. Remove the motor/top and place it upside down. Remove the dust filter from the filter basket being careful
not to damage the filter.
3. Slide the foam filter onto the filter basket making sure to cover the entire filter basket. (Fig. 1–2).
4. Replace the motor/top (5) onto the container (1) and fasten it with the over-centre catch (7).
Cleaning the foam filter
1. Carefully remove the foam filter (Fig. 3).
2. Wash the filter by hand using water and a mild detergent and finish off by rinsing in water.
Let it air-dry and replace the filter.