18
English
2. Connect a suitable 13.5 mm
bore drain hose (sold separately).
Make sure that the drain hose is
secure and seal the connection to
prevent leakage.
3. The other end of the drain
hose should be inserted into
a drain which is lower than
the drain hose connection on
the dehumidifier.
4. Position the hose in such a way that the water can drain freely. Avoid kinking and
pinching the hose.
5. To remove the drain hose, switch the dehumidifier off, unplug it and disconnect
the drain hose.
Care and maintenance
• Before the dehumidifier is cleaned or serviced it must be switched off and unplugged.
• Do not wash the water tank in a dishwasher.
• Clean the exterior of the dehumidifier using a lightly moistened cloth. Use only mild
cleaning agents, never solvents or corrosive chemicals.
• Vacuum clean the air inlet and outlet grilles of the dehumidifier.
• Remove the water tank (refer to the Emptying the water tank section above) every
14th day and wash it by hand using a mild detergent. Rinse it with clean water.
• Clean the mesh filter every 14th day, refer to the
Mesh filter
section.
• If the dehumidifier is not to be used for an extended period:
- Switch the dehumidifier off and disconnect it from the power supply.
- Clean the housing of the dehumidifier.
- Wait 24 hours before emptying the water tank to ensure that all the water in
the dehumidifier has had time to collect in it.
- Remove the water tank, empty it, dry it and then refit it.
- Remove the mesh filter, vacuum clean it and refit it.
- Store the dehumidifier upright in a dry, well-ventilated place.
