4
English
Inserting batteries into the controller
Make sure the power switch on the controller is in the
OFF
position.
1. Unscrew and remove the battery cover.
2. Insert 6 × AA/LR6 batteries. Observe the polarity markings in the battery compartment.
3. Refit the battery cover and screw it on tight.
Inserting batteries into the car
Make sure the power switch on the car is in the
OFF
position.
1. Unscrew and remove the battery cover.
2. Insert 3 × AAA/LR03 batteries. Observe the polarity markings in the battery
compartment.
3. Refit the battery cover and screw it on tight.
Charging the helicopter
1. Remove the cover and pull the charger cable out.
2. Set the power switch on the helicopter to
OFF
. Plug the charger cable into
the charger socket on the helicopter.
3. Set the power switch on the controller to the
ON
position. The green charging
indicator will flash during charging and will shine steadily when the battery is fully
charged. Unplug the charger cable when charging is complete.
