E
N
G
LI
S
H
Top ring
f) Start filling the pool with water. When the pool water is about 2 cm deep, stop
filling and straighten out any creases in the pool. From the inside of the pool, push
outwards at the joint of the pool sides and bottom. From outside the pool, grip the
bottom of the pool and pull it outwards. This way the pool will be filled evenly and
stay round. If you still have problems, get two people to stand on opposite sides of
the pool and pull until the creases disappear.
NOTE!
If you have 2.5-5 cm water on one side of the pool before the middle starts
filling, the pool is not on level ground. In this case, the pool should be emptied and
the procedure repeated.
NOTE!
The pool is too heavy to be moved once you have begun filling it.
g) You can now start filling the pool to the correct level; there are marks on the sides of
the pool. The lowest water level is 15 cm above the filter intake. As the pool fills the
sides of the pool will be raised by the rising water level. Check the pool occasionally
to make sure that it is filled evenly. Fill the pool until the water reaches the marks
inside the pool. Do not fill above the marks.
Correct water level
The sides of the pool will be
raised by the rising water level.