3
English
Gas Torch/Heat Gun/Soldering Iron
Art.no 30-7643
Main parts
Operation
Filling gas
1. Only use high quality butane gas.
2. Make sure on/off button is in
off
-position
before filling.
3. Follow instructions on gas container.
Push tip into filling valve and pump lightly
for best result.
See Fig. 1
.
4. After filling, let gas stabilize for a few
minutes before you ignite it.
Ignition
A. Blow torch
1. Turn on/off button from left (off)
to right (on) for ignition.
See Fig. 2.
2. Turn lever for adjusting the flame from left (-)
to right (+), until you hear a soft hissing.
3. Push igniter forward to ignite the gas.
Wait for 2 seconds until you release the igniter.
See Fig. 3
.
B. Soldering tip/Heat gun nozzle
1. First make certain that the tips are not hot before you begin switching any of them.
2. Attach the soldering head with suitable soldering tip or the heat gun nozzle onto
the blowtorch head.
See Fig. 4
.
Heat gun nozzle
Soldering head
Blow torch head
Igniter
Folding support
On/off button
Lever for adjusting
the flame
Gas container
Filling valve
Fig. 1
Fig. 2
Fig. 3
Fig. 4
