12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3. You may prefer to take the tool to your CLARKE dealer if internal
maintenance is required.
GREASING
The right angle drive is fitted with a
grease nipple to provide a facility for
lubrication of the drive gears.
1. After extensive use, apply a shot
of general purpose grease using a
suitable grease gun.
PERFORMANCE
Please note that outside factors may
effect the operation and efficiency
of the air tool.
These include reduced compressor output, excessive drain on the airline,
moisture ingress, restrictions in the air-line such as the use of connectors of
incorrect size or poor condition which will reduce the air supply.
Your air tool has been designed to give long & trouble free service. If, however,
having followed the instructions in this booklet carefully, you encounter
problems, take the unit to your local CLARKE dealer.
ACCESSORIES
A wide range of accessories is available including filter/regulators, lubricators,
high-pressure hoses (5 to 50 metres) etc.
Contact your CLARKE dealer for further information or CLARKE International
Service Department.
CLARKE Air Line Oil (part no. 3050825) is available from your CLARKE dealer.
SUITABLE STONES INCLUDE:
CAT144 (10 piece grinding stone set) part no 3120158.
Summary of Contents for X-Pro CAT206
Page 16: ......
