Clarke Woodworker CTS10PLM, Operating & Maintenance Manual

Page: 9 / 30

UN-PACKING AND CHECKING CONTENTS
The Table Saw is shipped complete In one carton.
Separate all parts and check to ensure that all components are accounted for, according to the
following list, before discarding any packing material.
Should any component be missing or damaged in transit, please contact your CLARKE dealer
immediately, or CLARKE Customer Service Department on 020 8988 7400.
Checking Straight
Edge with Comb
Square
2
Fig.1
Table of Loose Parts
A Table Saw Assembly.
B Rip Fence (Without Handle).
C Mitre Gauge Assy (With Handle).
D Mitre Gauge Storage
E Rip Fence Storage
F Blade Guard Assy., c/w bracket
and anti-kickback pawis
Loose parts in bags
G Arbor Spanner.
H Saw Blade Securing Nut Spanner
J Rip Fence Handle
K Blade Height Adjuster Wheel Handle with nut.
L Support Block c/w Blade Guard Mounting
Bracket and 2pcs M5x12mm screws and
lockwashers
M Support Block Mounting Bolt, lockwasher.
1 x spacer and 1 x flat washer.
N 1 x Coach Bolt with lock washer and nut.
(For securing the Blade Guard Assy to Blade
Guard Mounting Bracket).
P Push Stick
Tools Needed for Assembly
1. Combination Square - Must Be True
- check as shown in diagram opposite.
2. Phillips Screwdriver
3. Medium Screwdriver
4. 10mm Spanner