SPECIFICATIONS
Model No ....................................................................... CTS1OPLM
Part No ........................................................................... 6500741
Motor .............................................................................. 230V ~ 50Hz 1 ph
Power rating .................................................................. 1,525 Watts
Speed ............................................................................. 4800 rpm
Fuse rating ...................................................................... 13Amps
Saw Blade ...................................................................... 10” diameter, (255 mm)
Bore ................................................................................. 5/8”(16mm)
Maximum depth of cut ................................................ 70mm
Gross Weight .................................................................. 20.5KG
Table dimensions ........................................................... 660x446mm (26”x 17
1
/
2
”) overall
Noise level at operating position ................................ 98dB LWA
(Cutting 50mm soft wood)
Please note that the detaiis and specifications contained herein, are correct at the time at going to print. However, CLARKE
INTERNATIONAL reserve the right to change specitications at any time without prior notice. Always check machines’ data label
Use of machine
This machine is designed to rip and cross cut wood exclusively, up to a maximum thickness of 70mm.
It
is NOT designed to carry out ‘non-through cut’ operations.
For correct operation it must be fixed and operated as laid down in this manual.
This saw is intended for DIY and hobby use ONLY
Restrictions of use
This saw is NOT suitable for cutting:
•
Timber greater than 70mm in thickness,
•
Metal. Stone, Rubber, Plastic, Bones, Etc.
•
Logs or round timber.
DO NOT
use to rebate, tenon, mould or groove.
DO NOT
fit any other blades or combination of blades.
DO NOT
use as a free standing machine or as a hand held machine.
DO NOT
modify the machine or its guards/controls in any way,
DO NOT
use with any covers/guards removed.
4
Summary of Contents for Woodworker CTS10PLM
Page 28: ...PARTS DIAGRAM...
Page 30: ...PARTS DIAGRAM Motor and Blade Adjuster Components...
