11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
STORAGE
1. Remove the bolt and slide the jib
extension back to its shortest
position. Replace the bolt to
secure the jib.
2. Release the control valve to lower
the jib assembly to its lowest
position.
3. Pull out the ‘R’ clip, which secures
the each arm locking pin, then
pull out the lock pin.
4. Raise the arm up to its storage
position.
5. Replace the arm locking pin
through the hole in the frame so
that the arm is locked in the up
position.
6. Replace the retaining clip to
secure the arm locking pin.
7. Store the pump handle in its
bracket on the side of the main
support post.
8. Once the crane is folded use
extreme care when moving it to
the storage location.
STORAGE WARNING
1. The crane
MUST
be firmly secured
to a wall or fixed location when
not in use.
2. Use a strong strap or chain or
suitable restraint to prevent any
accidental movement.
3. Test that the crane is firmly secured before leaving it in its storage location.
Summary of Contents for Strong-Arm 7611011
Page 20: ......
