8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10. Add the two side braces, bolting
them between the base frame
and the main support post. Leave
the bolts loose until they are
aligned with the hole in the main
support post. Once aligned, fully
tighten the side braces to the
base and the support post.
11. Fix the ram to the main support
post using 75 mm bolt, washer
and nut.
12. Attach the jib to the top of the
main support post using the 100
mm bolt, washer and nut.
13. Connect the top of the ram to the
jib as shown using 65 mm bolt,
washer and nut.
NOTE:
The ram may require partially
extending to facilitate
assembly.
14. Slide the jib extension into the jib,
using the locating pin to secure it
in the required position.
Summary of Contents for Strong-Arm 7611011
Page 20: ......
