IMPORTANT
:
Before use, ensure the water supply is of adequate volume for your
needs, e.g., if you use a water butt - ensure it contains sufficient water.
Detergents
Fig.4.
Fuel
Unscrew the fuel filler cap (C, Fig.4), and
fill the tank with diesel fuel using an
appropriate size funnel.
If you intend to use the chemical
injection facility, drop the end of the
filter take-up hose, situated at the rear
of the machine and which is fitted with
a filter, into the detergent cannister.
NOTE:
If the filter is loose, ensure it is attached
to the end of the detergent pick-up hose
before use.
Use ONLY those detergents specifically
designed for use with Power Washers.
We recommend the use of CLARKE
Traffic Film Remover, which is a powerful
low foaming agent for car cleaning,
patio cleaning etc., or CLARKE Wash &
Wax, both available from your CLARKE
dealer.
Ensure the detergent is mixed according
to the manufacturers instructions.
See ‘Operation’ for additional
infor mation regarding the use of
detergents.
Fig.5.
Dilute the detergent according
to manufacturers instructions
8
WARNING: DO NOT USE PETROL
13
MOTOR THERMAL OVERLOAD
Should the motor overheat, the motor thermal
overload will intervene.
Allow at least three mins., then remove the main
cover and press the reset button, located
beneath the main ON/OFF switches, protected
by a transparent cover, shown in Fig 18.
Whilst carrying out this operation, check the
serviceability of the 1amp fuse, adjacent to the
reset button.
Fig.18.
HEATING OVERLOAD
Fig.17.
Should the machine overheat, the thermal
overload will intervene.
Allow at least three mins. before removing the
main cover, unscrewing the protective cap,
on the side of the main junction box, arrowed
in Fig 17, and pressing the reset button.
NOTE: The reset buttons will only activate once the temperatures reduce to a safe level. This
should normally take 3 mins. or so, but could be longer depending upon circumstances.
Should the machine stil fail to start, following the reset procedures, then the problem is likely
to be more serious. Contact your Clarke dealer
