4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
GENERAL SAFETY RULES
1.
NEVER
direct the spray towards any person or animal.
2.
NEVER
direct the spray towards electrical wiring or equipment.
3.
NEVER
hold your finger over the high pressure nozzle.
4.
NEVER
allow children to use this machine.
5.
NEVER
operate the machine with any of the covers removed.
6.
NEVER
attempt any repairs to this machine always refer to a qualified
service agent.
7.
NEVER
supply any liquid other than water to the water inlet.
8.
NEVER
use the chemical injection facility to introduce solvents, e.g. paint
thinners, petrol, oil etc.
9.
ALWAYS
release any residual pressure in the system by turning off the water
supply and operating the trigger before disconnecting any hose or
accessory.
10.
ALWAYS
keep the machine itself dry and well clear of water spray
11.
ALWAYS
wear protective clothing and safety glasses. Loose particles and
other debris may be propelled at high speed by the water jet.
12.
ALWAYS
grip the gun firmly before pressing the trigger, expect the gun to
‘kick’ when starting.
13.
ALWAYS
respect the requirements of the local water company. Power
washers may only be connected to the mains drinking water supply, if a
backflow preventer valve is installed in the supply hose.
14. When not in use,
ALWAYS
disconnect from the water supply, and ensure the
system is completely drained. Store in a cool dry location.
15. When using the chemical injection facility, use only the chemical cleaning
agents (detergents), that are approved for power washers. CLARKE Traffic
Film Remover or CLARKE Wash and WAX (available from your dealer), is
recommended.
16. Refuel in a well ventilated area with the engine switched off.
17. Do not use or refuel near naked flames.
WARNING: Water at high pressure can be dangerous and can cause
damage to persons or property if the operator is careless. Never allow
anyone to operate this equipment unless they are thoroughly reliable,
and familiar with the safety precautions.
Summary of Contents for PLS190N
Page 28: ......
