11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
• Grind only on the face of the grinding wheel and never the side of it.
NOTE:
Prolonged grinding will cause tools/workpieces to become hot. Take
care when handling hot items.
5. Switch the bench grinder off using the on/off switch when you have
finished.
DRESSING THE GRINDING WHEEL
The grinding wheel may need dressing occasionally. Only dress the wheel with
a proper dressing tool, whilst wearing safety goggles or glasses. If in doubt seek
professional advice. Dressing tools are available from your CLARKE Dealer.
Grinding wheel dresser model no ET125;- part no 1700225
SHARPENING TIPS
SCISSORS
If possible, take the scissors apart to make the sharpening operation easier
and safer. Remove material only from the outside surface and work from the
heavy end of the blade toward the tip.
KNIVES
Remove metal from both faces of most knives, working from the large end of
the blade toward the tip.
REPLACING THE GRINDING WHEELS
The grinding wheel must be replaced
whenever the distance between the
external diameter of the wheel and
the edge of the grinding wheel cover
is greater than 6 mm.
1. Remove the screws shown and lift
off the cover.
2. Hold the other wheel by hand and
remove the nut and outer disc
from the damaged wheel.
WARNING: DO NOT USE DAMAGED GRINDING WHEELS.
WARNING: SWITCH THE GRINDER OFF AND DISCONNECT THE POWER
SUPPLY BEFORE CHANGING THE GRINDING WHEELS
Summary of Contents for METALWORKER CHDBG500
Page 16: ......
