6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ELECTRICAL CONNECTIONS
This product is provided with a standard, 230 volt (50Hz), BS 1363 plug, for
connection to a standard, domestic electrical supply. Should the plug need
changing, make sure that a plug of identical specification is used.
If the colours of the wires in the power cable do not correspond with the
markings on the terminals of your plug, proceed as follows.
• Connect the
blue
wire
to the terminal which
is marked
N
.
• Connect the
brown
wire to the terminal
which is marked
L
.
• Connect the
yellow
and green
wire to the
terminal which is
marked E or
.
• See the specification
table for the correct
fuse size.
AN APPROVED RESIDUAL CURRENT DEVICE (RCD) WHICH HAS A TRIPPING
CURRENT OF LESS THAN 30MA MUST BE USED.
If you are not sure, consult a qualified electrician. DO NOT try to do any
repairs.
WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS FULLY
BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY.
WARNING: THE WIRES IN THE CABLE ARE COLOURED AS FOLLOWS:
BLUE = NEUTRAL BROWN = LIVE YELLOW AND GREEN = EARTH
Plug must be BS1363/A approved.
make sure that the outer sheath of
Neutral
(Blue)
Live
(Brown)
Earth
(Green and
the cable is firmly held by the clamp
Yellow)
Summary of Contents for METALWORKER 6500491
Page 12: ......
