5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2.
DO NOT switch the buffer/polisher on whilst the mop is in contact with the
workpiece
.
3.
Avoid polishing dissimilar metals with the same buffing mop
; galvanic
corrosion may occur.
4.
DO NOT
touch the workpiece immediately after polishing as it may be hot.
5.
DO NOT
touch the buffing mop whilst operating or whilst plugged into the
mains power.
6.
DO NOT
leave the buffer/polisher running unattended.
7. When not in use, switch the buffer/polisher off and unplug from the power
supply.
SAFETY SYMBOLS
SAFETY SYMBOLS & PICTOGRAMS
The following safety symbols are found on the product
Read the manual
and safety
instructions before
use
Eye protection
should be worn
Ear protection
should be worn
Dust mask should be
worn
Hazard;- motor gets
hot
Wear protective
gloves
Summary of Contents for METALWORKER 6500491
Page 12: ......
