7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INITIAL BATTERY CHARGING
1. Charge your jump-start battery before using it for the first time.
2. Recharge the jump-start battery after every occasion of use if possible,
and thereafter, at least every 30 days.
3. Always avoid leaving your jump-start in a discharged state.
FOLLOW THE ABOVE POINTS TO ENSURE MAXIMUM LIFE FROM THE BATTERY
.
Two means of charging the battery are provided:
1. Via a 230V mains electricity
supply, using the mains adaptor,
as shown.
2. Via a 12V supply using the vehicle
cigar lighter adapter with cable
and plug provided.
NOTE:
Using a 12V vehicle supply,
the battery will not charge to
maximum, but only to
approx. 50% of its capacity.
NOTE:
A 5 amp fuse is fitted into the cigarette lighter plug adaptor,
accessed by unscrewing the end cap of the adaptor. Take care
not to loose the spring when unscrewing this cap.
CHARGING USING THE 230V MAINS ADAPTOR
1. Plug the cable into the socket in
the charger, then plug the
adaptor into the mains supply
and switch on.
• The red CHARGING light on the
jump-start will come on to
indicate charging is in progress.
2. Continue to charge until the RED
charging light goes out. It is
important to note that this could
take several days, dependant
upon the state of charge of the
battery.
• Pressing the ‘TEST’ button, with
the charger disconnected, will
REVERSE
Summary of Contents for JS900
Page 12: ......