Clarke JS900 Operating & Maintenance Instructions Download Page 6

6

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

COMPONENT IDENTIFICATION

The JS900 & 910 is a rechargable power supply which can be used to start a 
car in the event of a flat battery. The unit can also be used to power electrical 
appliances via a cigarette lighter type socket using the adaptor supplied. The 
unit also incorporates a built-in lamp and may be used as a stand alone light 
source. An audible warning will sound in the event of low battery voltage, or if 
the clamps are incorrectly fitted for jump starting (wrong polarity). The integral 

The integral air compressor (JS910) is ideal for pumping up tyres on the vehicle.

1

Positive Battery Connecting Lead

 to 

connect to positive battery terminal

8

Voltage Test Switch. 

Press to indi-

cate internal battery power level

2

Lamp

 to provide light for roadside 

repairs or emergency situations.

9

12 DC Socket 

connects the 230 

Volt charger for mains charging. 

3

230 Volt Charger

 to charge the 

internal battery pack

10

Negative Battery Connection Lead 

- connect to the negative terminal.

4

Cigar Lighter Adaptor

 complete 

with 5 Amp fuse.

11  

Air Compressor On/Off Switch

5

Voltage Meter 

to indicate the volt-

age level of the units battery. 

12

Air Pressure Gauge

6

Lamp ON/OFF Switch. 

Switches the 

lamp ON or OFF.

13

Adaptors

 for connecting the air 

line to different applications

7

Cigar Lighter Socket 

for use with the 

cigar lighter adapter provided.

14

Compressed Air Hose

/connector

Summary of Contents for JS900













Reviews: