8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING THE 12V ADAPTOR
1. Ensure the vehicle is not running.
2. One end of the twelve volt lighter plug lead should be plugged into one of
the two cigarette lighter sockets.
3. The other end should be inserted into the vehicle lighter socket.
4. The engine should then be started.
• The state of charge of the internal battery can be checked by
disconnecting the lighter plug lead and then depressing the battery
status button.
• This method will only partially charge the battery. The 230 volt
adaptor option is the preferred option.
BATTERY CHARGE STATUS
1. Remove any charging devices
from the unit.
2. Press the battery test button,
• The battery level will be shown
on the gauge.
WARNING: BEFORE USING THE DC POWER SOURCE FROM THE CAR
CIGARETTE SOCKET CHECK THAT ITS FUSE RATING IS RATED AT 15A OR
HIGHER.
