12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING THE 12 VOLT POWER SUPPLY
Two cigarette lighter type sockets allow connection to DC electrical
equipment via a standard DC adapter.
USING THE INVERTER
To protect the battery from damage, this unit has a low-voltage protection
function which means when the voltage falls below a certain value, it will
sound an alarm, then turn off automatically.
It also incorporates short-circuit protection, if the device being powered
develops a short-circuit fault, the inverter turns off automatically.
1. Set the inverter switch to the
INVERTER position.
2. Plug the electrical equipment into
the 230V AC outlet.
3. Start electrical equipment.
4. The battery level is indicated by
the inverter power indicator lights.
5. If the inverter fails, the inverter
status light illuminates.
6. If the inverter fails suddenly, for example, there is a short circuit, check the
fuse and replace if required.
WARNING: BE AWARE THAT A FULLY CHARGED 12V BATTERY CAN HAVE
AN OUTPUT OF APPROX.13.5V. CONSULT THE APPLIANCE HANDBOOK TO
ENSURE IT IS SAFE TO OPERATE FROM A 12V BATTERY.
WARNING: WHEN USING THE INVERTER FUNCTION THE JS5IN1 AND
WHATEVER YOU ARE POWERING MUST BE INSIDE AWAY FROM ANY RAIN
OR MOISTURE.
WARNING: THE INVERTER OUTPUT VOLTAGE IS 230V 50HZ, (MAX 300W).
CAUTION: MAKE SURE THAT THE APPLIANCE BEING CONNECTED IS IN
GOOD WORKING ORDER. IF IT BEGINS TO ACT ABNORMALLY OR STOPS
SUDDENLY, DISCONNECT IT FROM THE JUMPSTART.
CAUTION: MAKE SURE THE APPLIANCE DOES NOT EXCEED THE MAXIMUM
RATED LOAD FOR THE JUMPSTART.
CAUTION: ANY DEVICE WHICH CONTAINS AN INDUCTIVE LOAD E.G.
DEVICES THAT CONTAIN A MOTOR MAY REQUIRE MORE CURRENT ON
START UP.
