9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
LIMITING THE DEPTH OF CUT
7. Lower the top housing so that the
grinding wheel skims the chain
tooth.
8. Hold it at that position while you
tighten the depth limiter until it
touches the stop on the base.
• The grinding wheel will only go
down to that point from now
on.
9. Tighten the depth limiter locking
screw against the main body to secure.
LIMIT THE AMOUNT OF MATERIAL REMOVED
10. Depending on the amount of
material you wish to remove,
tighten or loosen the Lock Knob
and adjust the chain stop
adjustment screw.
• This will determine how much
material is removed. Once you
set the chain stop adjustment
screw, fully tighten the lock
knob.
11. Lower the chain stop so that it drops behind the tooth that you want to
start with.
FINALLY
12. Lock the chain in the sliding guide
by turning the handle clockwise.
The handle should be positioned
so that you can easily release and
tighten it.
• You will need to release it each
time you move to the next
tooth, and tighten it to sharpen
each tooth.
Summary of Contents for ECSS2
Page 17: ......
