background image

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this Chainsaw Sharpener.

Please read this manual thoroughly, before attempting to operate, and 
carefully follow all instructions given. 

It is vitally important that ALL precautions are taken, as specified, which will not 
only provide protection for yourself and that of others around you, but will also 
ensure that the product will give you long and satisfactory service. 

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 
12 months from the date of purchase. Please keep your receipt as proof of 
purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not affect your statutory rights. 

SPECIFICATIONS

Operating Voltage:

230 V @ 50Hz

Nominal Power

85 Watts

No Load Speed

4800 rpm

Disc Diameter

108 mm

Protection Class

II

Sound Pressure Level         LpA

77 dB

Sound Power Level            LWA 

90 dB

Vibration

2.69 m/s

2

Dimensions (L x W x H) 

200  x 230 x 315 mm

Weight (kg)

2.9 kg

Part Number

3402077

Summary of Contents for ECSS2


















Reviews: