Clarke ECSS-1, Assembly And Instruction Manual

Page: 7 / 16

7
ASSEMBLY
The chain saw sharpener is supplied only partly assembled.
1. Remove the bolts from both
pivot clamps as shown in Fig 4.
2. Insert the axle into the body of
the chainsaw sharpener. Fig 5.
3. Place the chainsaw sharpener
on the base plate.
•
Make sure the nipple on the
chainsaw sharpener is
positioned inside the depth
limiter (N) spring as shown in
Fig 6.
4. Replace the pivot clamps and
secure in place using the bolts
removed in step 1.
Note: Before starting the unit,
make sure the grinding
disc is fixed firmly. Never
operate the unit without the
protective cover.
5. Place the base plate (A) on a
solid, level surface, e.g. a
workbench. Fig 7.
•
Ensure that the base plate
extends out far enough over
the edge of the work bench
so that the chain can hang
down freely and you can
easily access the angle
adjustment screw (L) at the
bottom.
6. Mount the base plate (A) using
the mounting holes (O).
The chain saw sharpener is now
ready for use.
Fig 4
Fig 5
Fig 6
Fig 7