26
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
AFTER USE
TRANSPORT
1. Remove all the parts of the saw that could make transport more difficult.
2. Swing the stabiliser legs into the closed position and secure using the latch
shown below.
3. Starting with the leg on the right of
the machine, support the table
saw buy holding the extension
table, then rotate the locking
plate to release the leg.
4. Fold the leg under as shown and
place the saw on the ground.
5. Release the left leg in the same
way,
6. Fold the two legs up (the left leg
should be on the bottom), lock the left leg in place with the locking plate.
7. Pull out the transport handle and
transport the saw.
Summary of Contents for CTS13L
Page 32: ......
