14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
14. Place the support arm over the
bolt as shown.
15. Slide the rubber foot onto the bolt
(right extension table only).
16. Secure loosely using the washer
and nut supplied.
17. Fix the other end of the support
arms to the table saw using the
bolts supplied.
NOTE:
you may need to slide the
fixed end of the support arm
in a little to line up correctly.
18. Tighten up all the bolts.
• Make sure that the table is firm
and fully secure before use.
FITTING THE FRONT RAIL
1. Slide four coach bolts into the slot
at the back of the front rail as
shown.
2. Line up the bolts and fit the front
rail into position.
3. Make sure that the end of the
front rail is flush with the end of the
extension table.
4. Secure with washers and nuts
from the bottom of the table saw
top.
Summary of Contents for CTS13L
Page 32: ......
