2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INTRODUCTION
Thank you for purchasing this CLARKE product. The table saw has been
designed to perform the sawing operation of ripping, cross-cutting, bevelling
and mitring in wood, wood products and plastics. This unit is designed for use
with a 250 mm carbide tipped blade.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
CONTENTS
The following items should be supplied in the cartons. If any parts are missing,
do not operate your table saw until the missing parts are replaced. Failure to
follow this rule could result in serious injury.
1 x Table Saw c/w Stand Assembly (Fitted)
1 x Mitre Guide Fence
2 x Side Table Extensions
1 x Upper Blade Guard
4 x Side Table Extension Support Brackets
1 x Extraction Hose
1 x Wheel & Axle Assembly
1 x Push-stick
1 x Parallel Fence Clamp / Mount Assembly
1 x 250 mm TCT Blade (Fitted)
1 x Parallel Fence
2 x Small Parts / Fixings Pack
1 x Mitre Guide Assembly
Summary of Contents for CTS13L
Page 32: ......
