13
Fig. 7
Riving Knife
1.
Remove the table insert.
2.
Raise the blade as far as possible. You may find it helpful to adjust the blade angle, so that the
blade lays on its side.
3.
Slide the Riving Knife into position, and adjust the Riving knife so that a clearance of no more than
5mm exists between blade and knife, and along the full length of the riving knife, as shown in Fig. 5
4.
Tighten the riving knife securing bolts as
shown in Fig. 4.
5.
When satisfied, tighten the riving knife securing bolt before replacing the Table Insert.
Note:
Make sure that the Riving Knife is directly in line with the blade at all times. If at any time it
becomes misaligned, it must be straightened before the table saw is used.
✘
✘ ✔
Fig. 6
Fig. 5
