4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
GENERAL SAFETY PRECAUTIONS
WORK ENVIRONMENT
1. Keep the work area clean and tidy.
2. Dress appropriately - do not wear loose clothing or jewellery. Tie long hair
out of the way.
3. Keep children and visitors away - do not let children handle the tools.
4. Do not operate air tools where there are flammable liquids or gases.
5. Do not overreach - Keep proper footing and balance at all times.
USE OF AIRLINE EQUIPMENT
1. Stay alert and use common sense - do not operate an air tool when you
are tired or under the influence of alcohol, drugs or medication.
2. Never use oxygen, CO
2
, combustible gasses or any type of bottled gas as
a source of power for air tools.
3. Do not exceed the maximum pressure for the airline component.
4. Check airline hoses for leaks or worn condition before use and ensure that
all connections are secure. Keep the hose away from heat, oil and sharp
edges.
5. Avoid damaging the component for example by applying excessive force
of any kind.
USE OF SPRAY GUN EQUIPMENT
NOTE:
Paint products used may be covered by COSHH Regulations.
1. Always check the manufacturers data sheets on the products being
sprayed for any particular hazards and follow the manufacturers
instructions. Take particular care if spraying isocyanate paints.
2. Always wear a suitable approved breathing mask when spraying, to
protect against inhalation of paint spray or fumes. An air feed mask may
be required when spraying some types of paint. If in doubt, check with the
paint manufacturer.
CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN
PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.
Summary of Contents for CTG8
Page 12: ......
