2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INTRODUCTION
Thank you for purchasing this CLARKE product.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
The CTG8 Air Texture Gun is a high capacity unit designed for large surface
coverage, handling most textured wall and ceiling finishes. It can spray most
liquid dry wall materials from joint cement, ceiling acoustics, wall texture,
splatter, semi-fog or any such material that will feed through the hopper. Use
of the 4 nozzles and 5-spray pattern orifice plate gives a total of 20 different
spraying combinations.
When opening the carton for the first time, check against the following list that
all the items are present. Any damage or deficiency should be reported to
your CLARKE dealer immediately.
T
he following items are supplied with the gun:
1 x Air Texture Gun
1 x Plastic Hopper
1 x 45-degree Elbow
Connector
1 x Spare Orifice Plate
Rubber Backing
2 x Hexagon Wrenches
(2.5mm & 4mm)
2 x Jubilee Clips
Stored inside the gun
4 x Spraying Nozzles:-
1.5mm, 2.7mm, 3.5mm
& 3.6mm
1 x 3/8” Box Spanner
Summary of Contents for CTG8
Page 12: ......
