9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
NOTE:
Sanding accessories can only be fitted one way. The sanding
accessory must slide on easily. Do not attempt to force it onto the tool
holder. Check the correct direction of the sanding accessory.
5. Fit the sanding roller as described
above.
6. Press the spindle lock button and
turn the sander by hand until the
spindle lock engages.
7. Turn the sanding belt anti-
clockwise along with the slots on
the sanding roller.
DUST EXTRACTION
Use a dust extraction device or a vacuum cleaner to remove dust from the
sanding accessory.
FITTING THE DUST EXTRACTION ADAPTER
1. Slide the dust extraction adapter into the spark deflector.
2. Connect the suction hose (not
included) to the dust extraction
adapter. Use the supplied reducer
ring if necessary.
3. Use a suitable dust extraction
device when toxic, carcinogenic
or fine dust is produced. Any
Clarke dust extractor would be
suitable.
CAUTION: HARMFUL OR TOXIC DUST MAY BE PRODUCED WHEN
SANDING LEAD PAINTED SURFACES, WOODS OR METAL. CONTACT
WITH, OR INHALATION OF THESE DUSTS CAN ENDANGER THE HEALTH OF
THE OPERATOR OR BYSTANDERS. CERTAIN DUSTS LIKE OAK AND BEECH
ARE CONSIDERED TO BE CANCEROUS IN CONJUNCTION WITH
ADDITIVES IN WOOD TREATMENTS (CHROMATE, WOOD PRESERVATIVES).
ASBESTOS-CONTAINING MATERIALS MAY ONLY BE HANDLED BY EXPERTS.
CAUTION: - USE A DUST EXTRACTION DEVICE OR A VACUUM CLEANER.
CAUTION: - WORK IN A WELL VENTILATED ROOM. - THE USE OF A DUST
MASK FILTER CLASS P2 IS RECOMMENDED. - OBSERVE LOCAL
REGULATIONS REGARDING THE HANDLING OF CERTAIN MATERIALS.
Summary of Contents for CSR310
Page 16: ......
