10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATION
SWITCHING ON AND OFF
• To switch the sander on, push
the switch to position 1.
• To switch the sander off, push
the switch to position 0.
VARIABLE SPEED CONTROL
The variable speed control allows you to adapt the speed of the tool to the
workpiece material.
The rotation speed can be set
between 1600 rpm and 3000 rpm
with the speed control switch.
The speed control switch has 6 levels
marked on it >1< indicates the lowest
speed setting >6< the highest.
NOTE:
The speed can also be
adjusted during operation as
described above.
• Use a low speed setting when
using a fine grit, when working with plastics or ceramics and when
removing painted or varnished surfaces.
• Use a high speed setting when using a coarse grit and when removing a
lot of material.
Summary of Contents for CSR310
Page 16: ......
