8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
FITTING THE SPARK DEFLECTOR
ASSEMBLY
1. Slide the spark deflector along the
grooves on the sanding arm.
2. Tighten the knurled screw.
ADJUSTMENT
1. When the spark deflector is
mounted it can be adjusted to
one of four positions as required
by the user.
2. Push the spark deflector into the
required position around the
sanding arm.
FITTING AND REMOVING ACCESSORIES
1. Press the spindle lock button.
2. Remove the securing screw with
the hex key provided.
3. Push the sanding accessory onto
the tool holder.
4. Secure by refitting the securing
screw.
WARNING: BEFORE FITTING ACCESSORIES MAKE SURE THAT THE TOOL IS
SWITCHED OFF AND UNPLUGGED.
Summary of Contents for CSR310
Page 16: ......
